Paradyne 3910 operation manual Configure Branch, Poll List Branch

DCP Operation

The LCD displays the first sequence fault field. (Sequence fault fields range from 1 to 8 and are

identified by a number in the upper right corner.) Press the key to view the remaining fields. The message Modem O.K. appears if no sequence faults have occurred.

To remove sequence fault records from both the LCD and nonvolatile memory, select Clear. The message Modem O.K. appears.

To exit this function and remain in the Status branch, press the key. To exit and return to the

Top-Level menu, press the key.

Configure Branch

The Configure branch of the LCD allows you to change and save the modem's configuration options. For configuration options and DCP configuration procedures, refer to Chapter 4, DCP Configuration.

Poll List Branch

The Poll List function is not available on Point-to-Point control modems or Multipoint

Tributary modems..

The Poll List (Plist) branch of the Top-Level menu allows you to identify downstream modems in order to support health and status polling and download broadcasting. The maximum number of devices is 32 on the secondary channel and 64 on the diagnostic channel.

ªStatusº

Status

Configure

Control

Test

SubHS

Call_Setup

Tlk/Data

Security

Remote

PList

(Tributary

only)

Display Clear Change Add Acquire

Active

Delete

Skip

3910-A2-GN32-30 November 1996 3-25