Paradyne 3910 Choose DLL Type SCClone, Cloning DC Broadcast Remote, Choose DLL Type DCBroadcast

DCP Operation

Clone Remote in Broadcast Configurations

A tributary modem configured for extended diagnostics (Diagnostic Connection configuration option set to Modem(DC)) can perform two types of Remote Clone operations. It can clone the upstream, VF connected, control modem (SC_Clone) or it can clone all the 391x modems attached to its downstream Diagnostic Channel (DC_Broadcast).

Choose DLL Type >

SC_Clone

F1 F2 F3

From the Choose DLL Type screen, press the F1 key to select SC_Clone to request the transfer of an exact copy of the tributary modem's firmware to the VF connected control modem.

Proceed to the section titled Implementing a Clone Remote Operation, which follows the descriptions of multipoint cloning operations.

Cloning DC Broadcast Remote

Before using Clone Remote in DC Broadcast configurations, make sure the tributary modem's active poll list contains all the network management addresses for the control modems that receive the download (refer to the Poll List section in this chapter), and ensure that the control modems are responding properly to polls (refer to the Sub-Network Health and Status Branch sections in this chapter).

Choose DLL Type >

DC_Broadcast

F1 F2 F3

From the Choose DLL Type screen, press the key until DC_Broadcast appears. Press F1 or F2 to transfer an exact copy of the tributary modem's firmware to the DC-connected control modem(s) using the Active Poll list.

Proceed to the section titled Implementing a Clone Remote Operation, which follows the descriptions of multipoint cloning operations.

3910-A2-GN32-30 November 1996 3-37