Sony NWZ-X1051 service manual Section Electrical Parts List, Home KEY Main

NWZ-X1050/X1051/X1060/X1061

HOME KEY MAIN

SECTION 6

ELECTRICAL PARTS LIST

Note:

•Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the com- ponents used on the set.

•-XX and -X mean standardized parts, so they may have some difference from the original one.

•Items marked “*” are not stocked since they are seldom required for routine ser- vice. Some delay should be anticipated when ordering these items.

•RESISTORS

All resistors are in ohms. METAL: Metal-film resistor.

METAL OXIDE: Metal oxide-film resistor.

F: nonflammable

•CAPACITORS uF: μF

•COILS uH: μH

•SEMICONDUCTORS

In each case, u: μ, for example:

uA. . : μA. . , uPA. . , μPA. . ,

uPB. . : μPB. . , uPC. . , μPC. . ,

uPD. . : μPD. .

•Abbreviation

AUS : Australian model

CH	: Chinese model
CND	: Canadian model
EE	: East European model
FR	: French model
JE	: Tourist model
MX	: Mexican model
TW	: Taiwan model

When indicating parts by reference num- ber, please include the board name.

Ref. No. Part No. DescriptionRemark

A-1602-782-A HOME KEY BOARD, COMPLETE

*************************

When HOME KEY board is defective, exchange the entire mounted board.

************************************************************

9-885-133-37 MAIN BOARD, COMPLETE (16G) (for SERVICE)

(NWZ-X1050: E, AUS, JE)

9-885-133-38 MAIN BOARD, COMPLETE (16G) (for SERVICE)

(NWZ-X1050: CH)

9-885-133-39 MAIN BOARD, COMPLETE (16G) (for SERVICE)

(NWZ-X1050: MX)

9-885-133-41 MAIN BOARD, COMPLETE (16G) (for SERVICE)

(NWZ-X1050: AEP, UK)

9-885-133-43 MAIN BOARD, COMPLETE (16G) (for SERVICE)

(NWZ-X1050: FR)

9-885-133-44 MAIN BOARD, COMPLETE (16G) (for SERVICE)

(NWZ-X1050: EE)

9-885-133-45 MAIN BOARD, COMPLETE (16G) (for SERVICE)

(NWZ-X1051)

9-885-133-46 MAIN BOARD, COMPLETE (32G) (for SERVICE)

(NWZ-X1060: TW)

9-885-133-47 MAIN BOARD, COMPLETE (32G) (for SERVICE)

(NWZ-X1060: E, AUS, JE)

9-885-133-48 MAIN BOARD, COMPLETE (32G) (for SERVICE)

(NWZ-X1060: CH)

9-885-133-49 MAIN BOARD, COMPLETE (32G) (for SERVICE)

(NWZ-X1060: MX)

9-885-133-50 MAIN BOARD, COMPLETE (32G) (for SERVICE)

(NWZ-X1060: CND)

9-885-133-51 MAIN BOARD, COMPLETE (32G) (for SERVICE)

(NWZ-X1060: AEP, UK)

9-885-133-53 MAIN BOARD, COMPLETE (32G) (for SERVICE)

(NWZ-X1060: FR)

9-885-133-54 MAIN BOARD, COMPLETE (32G) (for SERVICE)

(NWZ-X1060: EE)

9-885-133-55 MAIN BOARD, COMPLETE (32G) (for SERVICE) (NWZ-X1061)

		*********************
		< CAPACITOR >
C881	1-119-923-11	CERAMIC CHIP	0.047uF	10%	10V
C882	1-119-923-11	CERAMIC CHIP	0.047uF	10%	10V
C883	1-164-943-81	CERAMIC CHIP	0.01uF	10%	16V
C884	1-164-943-81	CERAMIC CHIP	0.01uF	10%	16V
		< CONNECTOR >
CN881	(Not supplied)	CONNECTOR, FFC/FPC 11P

32

Ref. No.	Part No.	Description			Remark
		< FET >
Q881	6-550-747-01	FET	3LP01S-K-TL-E
		< RESISTOR >
R881	1-218-985-11	METAL CHIP	470K	5%	1/16W
R882	1-218-953-11	METAL CHIP	1K	5%	1/16W
R883	1-218-985-11	METAL CHIP	470K	5%	1/16W
R884	1-240-695-91	METAL CHIP	1K	5%	1/20W
R885	1-240-695-91	METAL CHIP	1K	5%	1/20W
R886	1-208-927-11	METAL CHIP	47K	0.5%	1/16W
R887	1-208-927-11	METAL CHIP	47K	0.5%	1/16W
R888	1-208-911-11	METAL CHIP	10K	0.5%	1/16W
R889	1-208-911-11	METAL CHIP	10K	0.5%	1/16W
R890	1-208-911-11	METAL CHIP	10K	0.5%	1/16W
R891	1-208-911-11	METAL CHIP	10K	0.5%	1/16W
R892	1-218-985-11	METAL CHIP	470K	5%	1/16W
R893	1-240-726-91	METAL CHIP	470K	5%	1/20W
R895	1-240-760-91	METAL CHIP	100	0.5%	1/20W
R896	1-240-760-91	METAL CHIP	100	0.5%	1/20W
R897	1-218-990-81	SHORT CHIP	0
		< SWITCH >
S881	1-786-455-32	SWITCH, PUSH (1 KEY) (HOLD)

*************************************************************

		MISCELLANEOUS
		**************
BATT1	X-2349-102-1	BATTERY ASSY
CN01	1-822-382-11	CONNECTOR, DOT
EL01	1-802-813-11	ELEMENT, EL INDICATOR
FPC1	1-877-868-11	KEY FLEXIBLE PRINT BOARD
J001	A-1602-784-A	5PIN HP JACK ASSY
TPM1	1-480-788-11	TOUCH PANEL MODULE

*************************************************************

Note 1: In this set, only a part of parts that relate to the switch are supplied. Replace a part according to “METHOD OF JUDGING RIGHT AND WRONG OF PARTS RELATED TO SWITCH” (page 7) in servicing notes. Exchange the entire mounted board when parts that do not correspond to it are defective.

Note 2: When the MAIN board is replaced, there are some notes. Refer to “NOTE THE MAIN BOARD REPLACING” (page 4) in servicing notes for notes.