4-7-5. Wi-Fi power setting (POWER)
Checking method:
1.Enter the test mode.
2.Press the [>]/[.] key to select the “WIFI”, and press the [u] key to enter the minor item.
3.Press the [>]/[.] key to select the “POWER”.
4.Press the [u] key, the power setting is displayed.
Screen display
WIFI POWER
XXdBm
NWZ-X1050/X1051/X1060/X1061
4-7-7. Wi-Fi access point connection (APCONN)
Checking method:
1.Enter the test mode.
2.Press the [>]/[.] key to select the “WIFI”, and press the [u] key to enter the minor item.
3.Press the [>]/[.] key to select the “APCONN”.
4.Press the [u] key, the connection with the access point is begun.
Screen display
WIFI APCONNECT
(Connected)
SSID : XXXXXX
RSSI : XXX
SNR : XXX
IPADR : XXX.XXX.XXX.XXX
RXTHRU : XXX bps
5.In this state, each time the [VOL +]/[VOL
6.Press the [HOME] key, return to minor item selection screen.
Checking method:
1.Enter the test mode.
2.Press the [>]/[.] key to select the “WIFI”, and press the [u] key to enter the minor item.
3.Press the [>]/[.] key to select the “APINFO”.
4.Press the [u] key, the
Screen display
WIFI APINFO (X/X)
(Detected:XX)
XXXX XXXXXXX XX XX XXXXXXX XX XX XXXXXXX
5. Press the [HOME] key, return to minor item selection screen.
Checking method:
1.Enter the test mode.
2.Press the [>]/[.] key to select the “WIFI”, and press the [u] key to enter the minor item.
3.Press the [>]/[.] key to select the “APSCAN”.
4.Press the [u] key, the consecutive connection with the access point is begun. At this time, the result is not displayed.
Screen display
WIFI APSCAN <Acquiring...>
5.In this state, each time the [>]/[.] keys are pressed, dis- played page is changed.
6.In this state, each time the [u] key is pressed, access point information is acquired again.
7.Press the [HOME] key, return to minor item selection screen.
5. Press the [HOME] key, return to minor item selection screen.
25
