NWZ-X1050/X1051/X1060/X1061
Checking method:
1.Enter the test mode.
2.Press the [>]/[.] key to select the “POWER”, and press the [u] key to enter the minor item.
3.Press the [>]/[.] key to select the “DSVCHK”.
4.Press the [u] key, enter the state of the deep sleep.
5.Press the [HOME] key, release the state of the deep sleep.
Screen display
POWER DSVCHK
OK
6. Press the [HOME] key, return to minor item selection screen.
Checking method:
1.Enter the test mode.
2.Press the [>]/[.] key to select the “POWER”, and press the [u] key to enter the minor item.
3.Press the [>]/[.] key to select the “CHGCHK”.
4.Press the [u] key, the charge setting is displayed.
Screen display
POWER CHGCHK
AC
AC
5.In this state, each time the [>] key is pressed, the port setting for the charge is changed as shown in the table below.
|
| Port control |
|
Display | CHG_XCHGEN | CHG_PEN1 | CHG_PEN2 |
AC | L | H | H |
USB500 | L | H | H |
USB100 | L | H | L |
6. Press the [HOME] key, return to minor item selection screen.
Checking method:
1.Enter the test mode.
2.Press the [>]/[.] key to select the “POWER”, and press the [u] key to enter the minor item.
3.Press the [>]/[.] key to select the “BATTCHK”.
4.Press the [u] key, the battery voltage is displayed.
When the battery voltage cannot be confirmed, “ERROR” is displayed.
Screen display
POWER BATTCHK
X.XXXV
X.XXXV: Battery voltage
5. Press the [HOME] key, return to minor item selection screen.
4-2. Audio (AUDIO)
While playing the audio track, it’s in a repeat state. If [BACK] key is pressed, it’s stopped.
Press the [.] key to switch the HP/LINE/SPEAKER.
Screen display
MPTAPP (X.XX.XX)
POWER
AUDIO OUTPUT
VIDEO SN
OTHER F1
CLESTE F2
DAC SEPLR
WIFI SEPRL
FM MAXOUT
NC NMLZR
SHUTDOWN SPCHK
EXITTEST SPKCHK
USER1
USER2
USER3
16
