Manuals / Zanussi / Kitchen Appliance / Dishwasher

Zanussi ZSF 6280 Basic operation, The Programmes menu, The Options menu, The Settings sub-menu

Models: ZSF 6280

1 44

Download 44 pages 38.24 Kb

Page 9

Basic operation

Basic operation

This section contains basic information regarding the use of your dishwasher. Please read this section very carefully.

Programme menu

			AUTOMATIC



			EAT-LOAD-RUN
Programbutton

			70° INTENSIVE
			70° INTENSIVE


			ENERGY


			45° GLASS


			PREWASH

The Programmes menu

•After switching on the dishwasher, you will find yourself in the Programmes menu.

•Select your dishwashing cycle here using the Pro- gram button. In the Info status bar your current po- sition within the menu is shown.

The Options menu

•Using the Options button, go to the desired option. In the Info status bar your current position within the menu is displayed.

•For more detail about the options, refer to the re- spective sections; for more about the 3 IN 1 op- tion, see the section “Before using the appliance for the first time”.

•Use the Ok/Start button to switch from the menu item SETTINGS… to the Settings sub-menu.

The Settings sub-menu

Go to the desired setting here using the Options but- ton. In the Info status bar your current position within the sub-menu is shown.

• LANGUAGE

Set the language of the text line in the display; see also section “Resetting the language”.

Options menu

			3 IN 1
	button Options

			KEY LOCK
			KEY LOCK

		SETTINGS…
		button
		Ok/Start
		LANGUAGE
	button Options	WATER HARDNESS
	button Options	RINSE AID
		RINSE AID
		BUZZER

•WATER HARDNESS

Set the value for water hardness electronically (val- ue range 1 to 10).

•RINSE AID

If 3 IN 1 option is active: Activate or deactivate rinse aid inflow

If 3 IN 1 option is not active: Rinse aid inflow is al- ways switched on, even if with RINSE AID the val- ue OFF is selected.

•BUZZER

Activate or deactivate audible beep

3Using the Cancel button you can get back from any setting to the 3 IN 1 option.

9

Image 9

Zanussi ZSF 6280 manual Basic operation, The Programmes menu, The Options menu, The Settings sub-menu

Contents

User information DishwasherDear Customer The following symbols are used in the textInstallation and connection instructions ContentsInstalling the Dishwasher Service and Spare PartsPrior to using for the first time 1 SafetyChild Safety General SafetyDishwasher door safety catch Control Panel Diagram of ApplianceSwitching on for the first time - setting the language Display Basic operation The Settings sub-menuThe Programmes menu The Options menuPrior to Using for the First Time Adjusting an option/settingSetting the Water Softener Adjusting the hardness setting Setting electronicallyWater hardness Range3. Only when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Setting the acoustic signalLoading cutlery and dishes In daily useLoading cutlery Pots, Pans, Large Plates Cups, Glasses, Coffee ServiceLay or hang wine and brandy glasses in the slots in the cup racks The cup racks can be folded up out of the way for tall crockery itemsSpikes not folded away place glasses, mugs etc. in the upper basket Spikes folded away More room for serving dishesRaising / Lowering the upper basket Adjusting the Height of the Upper BasketAdding Detergent Detergent tablets Concentrated detergentsIf you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSelecting the dishwashing cycle Cycle Table When your dishes look like this, select an intensive programme Selecting a programmea normal or energy-saving programme a short programme e.g. 30 minute programmeInterrupting or Cancelling a dish- washing cycle Setting the Delay TimerCancelling the dishwashing cycle Cancelling a delay startSwitching the button lock on Switching Off the dish- washerCancelling the button lock temporarily Switching the button lock offCleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm 2. Clean spray arm jets1. To remove bottom spray arm, pull it upwards out of its catch Resetting the language What to do if …Remedying small malfunc- tions Possible cause MalfunctionRemedy 2 short warning tones, continThe dishes are still dirty If the Dishwashing Results are not SatisfactoryThe dishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesDisposal 2 Packaging material2 Old appliance Dishwasher Free-standing appliances Technical dataSample loading arrangements Notes for Test Institutes1 Safety Information for the Installation Installation and connection instructionsInstalling the Dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureExtension hoses Anti-flood systemSink outlet connection Water drainage if the dishwasher is built- in at high levelChanging a fuse Electrical ConnectionConnecting systems Service and Spare Parts 0870 5 929Customer Care Department 822 612 Subject to change without noticeThe Electrolux Group. The world´s No.1 choice