Safety Information for the Installation | Zanussi ZSF 6280 instruction

Installation and connection instructions

1 Safety Information for the Installation

•Only transport the dishwasher in an upright posi- tion, otherwise salt water may run out.

•Before using the dishwasher for the first time, check for any damage caused in transport. Do not under any circumstances connect an appliance that is damaged. In the case of damage, please contact your supplier.

•Never use the dishwasher if the mains cable, water inlet or drain hose are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible.

•Always plug the mains plug into a correctly in- stalled shockproof socket.

•Permanent connection: a permanent connection must only be installed by a trained electrician.

•Prior to using the appliance for the first time, en- sure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.

•Multi-way plugs / connectors and extension cables must not be used. This could constitute a fire haz- ard through overheating.

•The dishwasher’s cable must only be replaced by a Service Force Engineer.

•A water inlet hose with safety valve must only be replaced by a Service Force Engineer.

36

Image 36

Zanussi ZSF 6280 manual Safety Information for the Installation

Contents

ZSF Following symbols are used in the text Dear Customer Contents Safety Prior to using for the first timeChild Safety General Safety Dishwasher door safety catch Diagram of Appliance Control Panel Switching on for the first time setting the language Display Settings sub-menu Basic operationProgrammes menu Options menu Prior to Using for the First Time Adjusting an option/settingSetting the Water Softener Setting manually Setting electronically Water hardness Adjusting the hardness settingRange Manual Electronic Only when using the dishwasher for the first time Adding dishwasher Salt Filling Up with Rinse Aid Setting the acoustic signal Setting the Amount of Rinse Aid Required Daily use Loading cutlery and dishes Loading cutlery Cups, Glasses, Coffee Service Pots, Pans, Large PlatesPage Adjusting the Height of the Upper Basket Raising / Lowering the upper basketMaximum height of dishes Upper basket Lower basket Adding Detergent Concentrated detergents Detergent tablets Using 3in1 detergents If you want to use 3in1 productsIf you do not want to use 3in1 products any more If you want to use 4in1 products Selecting the dishwashing cycle Cycle Table Selecting a programme Setting the Delay Timer Interrupting or Cancelling a dish- washing cycleStarting a Dishwashing Cy- cle Switching Off the dish- washer Button lockRemoving the Dishes Care and cleaning Cleaning the filters Cleaning the spray arm jets Upper basket spray arm Bottom spray arm Resetting the language What to do if …Remedying small malfunc- tions Malfunction Possible cause Remedy Blocked Long warning tone can be If the Dishwashing Results are not Satisfactory Dishes are still dirtyDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishes Disposal Packaging materialOld appliance Technical data Dishwasher Free-standing appliances Sample loading arrangements Upper basket Safety Information for the Installation Installing the Dishwasher Free-standing appliances Connecting the dishwasher Connecting to the water supplyConnecting the inlet hose Permitted water pressure Anti-flood system Extension hosesSink outlet connection Water drainage if the dishwasher is built- in at high level Electrical Connection Changing a fuse Connecting systems 0870 5 929 Customer Care Department 822 612 Subject to change without notice