EMC P/N 300-002-803 Configuring the QLA40xx-Series HBA to discover iSCSI targets, What next?

Connecting to the Storage

Configuring the QLA40xx-Series HBA to discover iSCSI targets

The Ethernet IP and the iSCSI targets must be configured for the

QLogic iSCSI QLA40xx-Series HBAs.

To perform these tasks, knowledge is required of the Ethernet infrastructure topology, the IP addresses to be used for the HBA, and the IP addresses of the iSCSI ports on the targeted EMC storage arrays.

!IMPORTANT

Either the QLogic SANsurferCLI text-based utility or the QLogic SANsurfer GUI must be used to perform these configuration tasks.

Both the SANsurfer CLI and the SANsurfer GUI may be downloaded from the EMC-approved section of theQLogic website.

For more information, refer to the appropriate documentation on http://www.qlogic.com.

What next?

Select either text-based or GUI configuration method:

◆For a text-based method of configuring persistent binding using the QLogic SCLI, refer to “Configuring persistent binding using SANsurferCLI” on page 138 or consult the QLogic SANsurferCLI User Guide.

◆For a GUI-based method of configuring persistent binding using the QLogic SCLI, refer to QLogic SANsurfer User Guide.

136

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment