EMC P/N 300-002-803 manual Ethernet connectivity over the CNA

Additional Notes

Ethernet connectivity over the CNA

The QLogic FCoE CNA delivers lossless 10 Gb/s Enhanced Ethernet support with dynamic allocation of networking and storage bandwidth that may be used for either system ethernet or iSCSI traffic, as well as FCoE. The Linux driver that supports the ethernet and iSCSI traffic for this device is ixgbe. The driver will automatically be installed and loaded by your supported Linux distribution.

To configure the network capabilities of your QLogic CNA, refer to your Linux distributor's network administrator's guide for more details. If you are configuring your CNA for iSCSI traffic, refer to the EMC Linux iSCSI Attach Release Notes found on http://powerlink.emc.com for the iSCSI configuration after configuring the network first.

194

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment