EMC P/N 300-002-803 specs

Installing and Configuring the Linux Host with the QLogic Driver

parm: ql2xexcludemodel:Exclude device models from being marked as failover capable.Combine one or more of the following model numbers into an exclusion mask: 0x20 - HSV210, 0x10 - DSXXX, 0x04 - HSV110, 0x02 - MSA1000, 0x01 - XP128.

parm:	ql2xlbType:Load Balance Method : (0) None (1) static load balance
and Default : 0 All the luns exposed on the first active path			: 1 For
static load balance across active optimised		controller ports
parm:	qlFailoverNotifyType:Failover notification mechanism to use when
a failover or failback occurs.
parm:	MaxRetriesPerIo:How many total retries to do before failing the
command and returning to the OS with a DID_NO_CONNECT status.
parm:	MaxRetriesPerPath:How many retries to perform on the current path
before failing over to the next path in the path list.
parm:	MaxPathsPerDevice:Maximum number of paths to a device.		Default 8.
parm:	failbackTime:Delay in seconds before a failback is performed.
parm:	recoveryTime:Recovery time in seconds before a target device is
sent I/O after a failback is performed.
parm:	ql2xfailover:Driver failover support: 0 to disable; 1 to enable.
alias:	pci:v00001077d00002432svsdbcsci*
alias:	pci:v00001077d00002422svsdbcsci*
depends:	scsi_mod
vermagic:	2.6.9-22.ELsmp SMP gcc-3.4

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment

EMC P/N 300-002-803 manual

Models: P/N 300-002-803