EMC P/N 300-002-803 manual Installing the SANSurfer iSCSI GUI

Connecting to the Storage

Installing the SANSurfer iSCSI GUI

Note: This example in this section uses a v5.x-series driver. The same basic steps would apply for the v3.x-series driver.

To install the SANSurfer iSCSI GUI, complete the following steps:

1.Download the QLogic iSCSI SANsurfer GUI package from the EMC-approved webpage on the QLogic webpage at www.qlogic.com, as shown below.

The Sansurfer (ISCSI HBA Manager - Standalone) window diplays.

2. Click Next.

142

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment