EMC P/N 300-002-803 manual Supported iSCSI out of kernel driver versions Rhel

Installing and Configuring the Linux Host with the QLogic Driver

Table 8 Supported iSCSI out of kernel driver versions

OS

RHEL 4.6

RHEL 5.0

SLES 11 SP1 RHEL 6.0 RHEL 6.1

SLES 10 SP4

Driver version

5.01.01.04

5.02.11.00.05.06-c3 a

5.02.11.00.10.4-d2a

a. For models QLE8240, QLE8242, QLE8250, and QLE8252 only.

Refer to the latest EMC Support Matrix for specific qualified kernel versions and distributions.

Note: The support stated in the EMC Support Matrix supersedes versions listed in this document.

Installation instructions for the out of kernel QLogic driver

This section contains the following information for installing the out of kernel QLogic driver:

◆“Installing the Linux v2.4.x host and the QLogic v3.x-Series iSCSI HBA driver” on page 96

◆“Installing the Linux v2.6.x host and the QLogic v5.x-Series iSCSI HBA driver” on page 107

Installing the Linux v2.4.x host and the QLogic v3.x-Series iSCSI HBA driver

Using the QLogic iSCSI HBA with the Linux operating system requires EMC-approved HBA driver software and SANsurfer Management software. The driver functions at a layer below the Linux SCSI driver to present iSCSI devices to the operating system as if they were standard SCSI devices.

Note: Refer to the latest EMC Support Matrix for specific qualified kernel versions and distributions. The support stated in the EMC Support Matrix supersedes versions listed in this document.

96

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment