EMC P/N 300-002-803 manual Chapter Updating the CEE/Menlo or iSCSI Firmware

Contents

	Manually setting the topology for QLogic Fibre Channel
	adapters	43
	Manually setting the data rate for QLogic Fibre Channel
	adapters	44
Chapter 4	Installing and Configuring the Linux Host with the
	QLogic Driver
	Introduction	46
	QLogic SANsurfer and SANsurfer CLI	47
	Fibre Channel and FCoE in kernel driver versions	49
	Supported in kernel driver versions	49
	Installation instructions for the in kernel QLogic driver
	for Linux 2.4.x kernel	53
	Installation Instructions for the in kernel QLogic driver
	in Linux 2.6.x kernels	55
	Fibre Channel and FCoE out of kernel driver versions	59
	Supported out of kernel driver versions	59
	Installation instructions for the out of kernel QLogic
	driver	61
	Uninstallation methods for the QLogic v7.xx.xx/v8.xx.xx
	driver	76
	QLogic v7.x and v8.x series driver parameters	79
	iSCSI in kernel driver versions	89
	iSCSI supported in kernel driver versions	89
	Installation instructions for the in kernel QLogic driver
	in Linux 2.6.x kernels	91
	iSCSI out of kernel driver versions	95
	iSCSI supported out of kernel driver versions	95
	Installation instructions for the out of kernel QLogic
	driver	96
	Installing the Linux v2.4.x host and the QLogic v3.x-
	Series iSCSI HBA driver	96
	Installing the Linux v2.6.x host and the QLogic v5.x-
	Series iSCSI HBA driver	107
Chapter 5	Updating the CEE/Menlo or iSCSI Firmware
	Updating the QLogic CEE /Menlo firmware for FCoE
	adapters	130
	Updating the QLogic firmware for iSCSI adapters	131

4

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment