EMC P/N 300-002-803 manual Adapter model Protocol PCI spec BUS length Power Slot key

Installation Steps

QLogic offers adapters for each bus/slot type available. Table 2 shows each of the EMC-supported QLogic adapters, and their respective slot requirements. Be sure to consult both your server user guide and QLogic to ensure that the adapter you want to use is compatible with your server's bus.

Table 2	Slot requirements of EMC-supported QLogic adapters
Adapter model	Protocol	PCI spec	BUS length	Power	Slot key
QLA2200F	FC	PCI 2.1	64-bit	3.3V, 5V	Universal
QLA200	FC	PCI-X 1.0a & PCI 2.2	32-bit	3.3V, 5V	3.3V
QLA210	FC	PCI-X 1.0a & PCI 2.2	32-bit	3.3V	3.3V
QLA2310F	FC	PCI-X 1.0a & PCI 2.2	64-bit	3.3V, 5V	Universal
QLA2340LF	FC	PCI-X 1.0a & PCI 2.2	64-bit	3.3V, 5V	Universal
QLA2342LF	FC	PCI-X 1.0a & PCI 2.2	64-bit	3.3V, 5V	Universal
QLE2360	FC	PCI Express	x4 lane	3.3V	n/a
QLE2362	FC	PCI Express	x4 lane	3.3V	n/a
QLA2460	FC	PCI-X 2.0a & PCI 2.3	64-bit	3.3V	3.3V
QLA2462	FC	PCI-X 2.0a & PCI 2.3	64-bit	3.3V	3.3V
QLE2460	FC	PCI Express	x4 lane	3.3V	n/a
QLE2462	FC	PCI Express	x4 lane	3.3V	n/a
QLE220	FC	PCI Express	x4 lane	3.3V	n/a
QLE2560	FC	PCI Express	x4 lane	3.3V	n/a
QLE2562	FC	PCI Express	x4 lane	3.3V	n/a
QLE8042	FCoE	PCI Express	x8 lane	3.3V	n/a
QLE8140/8142	FCoE	PCI Express	x4/x8 lane	3.3V	n/a
QLE8150/8152	FCoE	PCI Express	x4/x8 lane	3.3V	n/a

Remember that some of the older adapters are tall (also referred to as full-height) and may not fit into a server with a low-profile chassis. These factors must be considered before implementing your configuration to avoid unnecessary delays and possible equipment swaps or returns.

Currently, the QLogic FCoE converged network adapters (CNAs) require servers that can accommodate full-height, full-length PCI Express adapters. Always refer to the EMC Support Matrix for the

32

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment