EMC P/N 300-002-803 manual Enter qioctl-install -install, RPM packages needed for RHEL5

Installing and Configuring the Linux Host with the QLogic Driver

3.Enter qioctl-install –install

The following is an example of load IOCTL module on RHLE4 U5 and above with command:

modprobe -v qioctlmod

RPM packages needed for RHEL5

To run the SANsurfer installer under Redhat 5 Linux, if the default install is selected, the following RPMs need to be installed:

compat-libstdc++-33-3.2.3-61.<arch>.rpm libXp-1.0.0-8.<arch>.rpm

Note: On x86_64 make sure to load 32 bit libs.

48

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment