EMC P/N 300-002-803 manual Set or uncomment the following variables in the top level

Configuring a Boot Device on an EMC Storage Array

The tarball contains the configuration files required to configure the QLogic driver within the DD-kit development environment. It contains the following files: Makefile,

disk-info.qla4xxx, modinfo.qla4xxx, pcitable.qla4xxx, and modules.dep.qla4xxx.

Obtain and configure a generic Red Hat Driver Diskette Development Kit

1.Download the current Device Driver Update Disk Development Kit (mod_devel_kit.tgz) from:

http://people.redhat.com/dledford/

2.Create a temp/ directory on your system. Copy the file downloaded in step 1 into the newly created directory.

Untar the file using the following command: [temp]# tar -xvzf mod_devel_kit.tgz

This creates a new directory named mod_devel_kit. Read the

README and README.new_kernel_versions in the mod_devel_kit directory before proceeding.

3.Set or uncomment the following variables in the top level

Makefile in the mod_devel_kit directory:

a.DRIVER=scsi (This specifies that you are building a SCSI driver)

Please verify that all other DRIVER variables are commented out. This is done by placing a # symbol on the desired lines to be commented out.

b.Set the kernel version to the version you wish to build the DD_kit.

Please verify that all other kernel versions are commented out.

For example for RHEL3.0, kernel version 2.4.21-32.EL:

RHEL3_KERNEL_DIRS=2.4.21-32.EL

4.Import the kernel tree for which you want to build the DD_kit.

This should import the whole kernel sources including the *.c and *.h files. Execute the following command in the mod_devel_kit directory:

For example for kernel version v2.4.21-32.EL:

178

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment