EMC P/N 300-002-803 manual QLogic v7.x series driver parameters page 2

Installing and Configuring the Linux Host with the QLogic Driver

Table 6	QLogic v7.x series driver parameters (page 2 of 3)
Parameters		QLogic default values		EMC default recommendations
qlport_down_retry		0	(uses value specified in NVRAM)	0	(uses value specified in NVRAM)
ql2xretrycount		20 (standard mode)/30 (failover mode)		20 (standard mode)
max_srbs		4096		4096
displayConfig		1		1
ql2xintrdelaytimer		3		3
retry_gnnft		10		10
ConfigRequired		0		0
Bind		0	(by Portname)/1 (by PortID)	0	(by Portname)
ql2xsuspendcount		10 6-second suspend iterations		10 6-second suspend iterations
ql2xdevflag		0		0
qfull_retry_count		16 retries		16 retries
qfull_retry_delay		2 seconds		2 seconds
extended_error_logging		0		0
ql2xplogiabsentdevice		0	(no PLOGI)	0	(no PLOGI)
ql2xfdmienable		0	(no FDMI)	0	(no FDMI)
qlogin_retry_count		0		0
ql2xioctltimeout		66		66
ql2xprocessnotready		1		1
ql2xuseextopts		0		0
			Failover-Specific Parameters:
MaxPathsPerDevice		8		8
MaxRetriesPerPath		3		3
MaxRetriesPerIo		(MaxRetriesPerPath *		(MaxRetriesPerPath *
		MaxPathsPerDevice) + 1		MaxPathsPerDevice) + 1

80

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment