
Installing and Configuring the Linux Host with the QLogic Driver
In the /etc/modules.conf file, the hostadapter line for the qla4010 driver will be appended. The options line containing the addition of the scsi_allow_ghost_devices and max_scsi_luns parameters will also be appended to the file. This will allow the host to correctly
Note: The Unisphere/Navisphere Host Agent requires that the disconnected
LUN 0 be reported.
1.Boot into the qualified and supported kernel onto which the driver will be installed.
2.Obtain the
3.Uncompress and extract the source files from the tar archive:
tar zxvf
The initial uncompression will provide you with the following:
4.Install the QLogic iSCSI driver via the installation script provided:
cd qliscsi-linux-3.22-2-install/
./ql-iscsi-install -i
Example of console output reported by the installation script:
#*********************************************************#
# QLogic HBA Linux Driver Installation # #*********************************************************# Kernel version:
Distribution: Red Hat Enterprise Linux AS release 3 (Taroon Update 5) Found QLogic Fibre Channel Adapter in the system
1: QLA4010
Installation will begin for following driver(s)
102
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment