EMC P/N 300-002-803 manual Configuring persistent binding using the SANsurfer GUI

Connecting to the Storage

Configuring persistent binding using the SANsurfer GUI

Note: This example in this section uses a v5.x-series driver. The same basic steps would apply for the v3.x-series driver.

To configure persistent binding using the SANsurfer GUI, complete the following steps.

1.Launch the SANSurfer GUI Utility.

# /opt/QLogic_Corporation/SANSurfer/SANSurfer

The following window displays:

2.Select the Target Options > Target Settings.

3.Click on the + icon near the bottom right of the screen.

146

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment