Installation Steps
Installing the adapter
Follow the instructions included with your adapter. The adapter installs into a single slot.
To connect the cable to the adapter:
1.(Optical cable only) Remove the protective covers on each
2.Plug one end of the cable into the connector on the adapter as shown in the appropriate figure in this step. (The hardware might be rotated 90 degrees clockwise from the orientation shown.)
•Fibre Channel adapter connectivity options include copper cable with DB9 connector, SC optical, and LC optical cable, as shown next.
– Copper cable with DB9 connector:
– SC optical cable: |
|
|
1 | 2 | 3 |
– LC optical cable: |
|
|
1 | 2 | 3 |
Installing the adapter
27
