Connecting to the Storage
Unconfiguring persistent binding using SANsurferCLI
Note: This example uses a
In order to unconfigure persistent binding using the SCLI, use the following command:
qliscsi-linux-5.00.4-2-install/scix
1. In the scix Main Menu, select option 6 for the target menu:
scix Main Menu
main Interactive Menu
Current QLA4010 HBA/Port Information:
HBA Serial Number: FS20403A00911 HBA Port: 0
IP Address: | 51.50.51.36 | Link: Up |
Port Name: | ||
Port Alias: |
|
|
1.Display General System Information
2.Display Program Version Information
3.List All QLogic iSCSI HBAs detected
4.HBA Options Menu
5.HBA Information
6.Target Menu
7.Diagnostic Menu
8.Display VPD Information
9.Set Working Adapter
10.Exit
enter selection: 6
2. In the scix HBA Target Menu, select option 3 to unbind the targets, and select the desired target ID to be unbound:
scix HBA Target Menu HBA Target Menu
Current QLA4010 HBA/Port Information:
HBA Serial | Number: FS20403A00911 HBA Port: 0 | |
IP Address: 51.50.51.36 | Link: Up | |
Port Name: | ||
Port Alias: |
| |
1. List Targets
2. Bind Target
3. Unbind Target
140
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
