EMC P/N 300-002-803 manual Chapter Connecting to the Storage, 137

		Contents
Chapter 6	Connecting to the Storage
	Zoning and connection planning in a Fibre Channel or Fibre
	Channel over Ethernet environment	134
	Planning procedure	134
	Establishing connectivity to the storage array	134
	Zoning and connection planning in an iSCSI environment	135
	Configuring the QLA40xx-Series HBA to discover iSCSI
	targets	136
	Configuring persistent binding for the Linux QLogic iSCSI
	HBA	137
	Configuring persistent binding using SANsurferCLI	138
	Unconfiguring persistent binding using SANsurferCLI	140
	Installing the SANSurfer iSCSI GUI	142
	Configuring persistent binding using the SANsurfer GUI	146
Chapter 7	Configuring a Boot Device on an EMC Storage Array
	Introduction	152
	Cautions and restrictions for booting from EMC storage
	array	153
	Symmetrix-specific cautions and restrictions	153
	VNX series- or CLARiiON-specific cautions and
	restrictions	153
	Limitations	155
	Common limitations	155
	Symmetrix-specific limitations	156
	VNX series- or CLARiiON-specific limitations	157
	Configuring a Symmetrix boot device for FC or FCoE	158
	Preparing the Symmetrix storage array	158
	Preparing the host	158
	Configuring the QLogic BIOS for SAN boot	159
	Configuring a VNX series or CLARiiON boot device for FC
	or FCoE	161
	Preparing the VNX series or CLARiiON storage system....	161
	Preparing the host	161
	Configuring the QLogic BIOS for SAN boot	162
	Installing the Linux operating systems with out of kernel
	drivers onto a boot device using FCoE Adapters	165
	RHEL 5 OS SAN-boot installation with QLogic FCoE
	adapters	165
	SLES10 OS SAN-boot installation with QLogic FCoE
	adapters	166

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment

5