Configuring a Boot Device on an EMC Storage Array
•If there are multiple QLogic HBAs, a list of addresses occupied by those HBAs appears. Since the EMC storage array is attached to the
4.From the Fast!UTIL Options menu, select Configuration Settings and press ENTER.
5.From the Configuration Settings menu, select Adapter Settings and press ENTER.
6.From the Host Adapter Settings menu, select Host Adapter BIOS and press ENTER to enable it if it is not already enabled.
Note: Refer to “EMC recommended NVRAM settings for Linux” on page 37 for recommended settings.
7.Press ESC to exit the Configuration Settings menu.
8.From the Configuration Settings menu, select iSCSI Boot Settings and press ENTER.
9.From the iSCSI Boot Settings menu, select Primary and press ENTER to enable this option if it is not already enabled.
The adapter will scan for attached storage devices which will be displayed on the screen.
10.Choose the Symmetrix storage array port from which the system will boot. A list of LUNs will be displayed in a new window. Select the LUN to be used as the boot device and press ENTER.
Note: On Symmetrix storage arrays, the LUN number of the first visible device to that port should be used.
11.Select iSCSI Boot and press ENTER to enable boot.
12.Select Primary Boot Device Settings and press ENTER to review the selected primary device for boot.
13.Press ESC in the Primary Boot Device Settings menu to return to the iSCSI Boot Settings menu.
14.Press ESC in the iSCSI Boot Settings menu to return to the Configuration Settings menu.
15.Press ESC in the Configuration Settings menu to return to the Options menu.
170
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
