EMC P/N 300-002-803 manual Adapter information for RHEL5, SLES10, and Sles

Additional Notes

Adapter information for RHEL5, SLES10, and SLES 11

QLogic fully supports upstream driver using sysfs start from RHEL5, SLES10, and SLES 11. QLogic adapter information is not available on /proc file system. To get the QLogic adapter information, you can manually go to /sys file system to probe all the necessary information. QLogic provides a script tool to help. You can download QLogic FC HBA Information Utility from EMC-approved site on the QLogic website.

Usage examples To display default adapter information, enter the following command:

# ./ql-hba-info.sh

To display detailed information of host 7, enter the following command:

# ./ql-hba-info.sh 7

To display detailed information of all hosts, enter the following command:

# ./ql-hba-info.sh --all

To support -v/--verbose parameters, enter the following commands:

#./ql-hba-info.sh -v 7

#./ql-hba-info.sh --verbose --all

To display QLogic adapters driver command line parameters, enter the following commands:

#./ql-hba-info.sh -p

#./ql-hba-info.sh --parameters

To display statistics of host 8, enter the following command:

# ./ql-hba-info.sh -s 8

To display statistics of all host, enter the following command:

# ./ql-hba-info.sh --statistics --all

Adapter information for RHEL5, SLES10, and SLES 11

201