Toshiba e-Studio250, e-Studio200, e-Studio160 manual Adjustment Items, Error Code List

1. ADJUSTMENT ITEMS

1.1 Error Code List

While the error message or “Call for service” symbol is flashing, pressing the [CLEAR/STOP] key and the [8] key on the digital keys at the same time shows one of the following error codes on the copy- quantity indicator as long as those keys are pressed.

Classification	Error code	Machine status
Transporting jam in the main	E01	Paper jam inside the machine
body	E02	Paper jam near the fuser unit
	E03	Paper remaining inside the machine at power on (Except
		for ADF/RADF)
	E04 to E07	Reserved
	E08	Transporting jam inside the ADU
	E09	Time out error that occurs at the paper feeding sensor
	E10	Reserved
Paper feeding jam	E11	Paper feeding jam at the ADU
	E12	Paper feeding jam at the SFB
	E13	Cassette 1 feeding jam
	E14	Cassette 2 feeding jam (PFU)
	E15	Cassette 3 feeding jam (PFP)
	E16	Cassette 4 (CM) feeding jam (e-STUDIO200/250 series)
	E17 to E18	Reserved
	E19	LCF feeding jam (e-STUDIO200/250 series)
	E20 to E30	Reserved
Transporting jam for the	E31	Paper not reach to feed sensor from cassette 2, so paper
optional trays		jam inside the main unit during cassette 2 feed
	E32	Paper not reach to feed sensor from cassette 3 or 4, so
		paper jam inside the main unit during the feed
	E33	Paper not reach to feed sensor from LCF cassette.
		(e-STUDIO200/250 series)
	E34	Paper not reach to 2nd cassette feed sensor from cas-
		sette 3 or 4. (Cassette 4 is e-STUDIO200/250 series)
	E35	Paper jam in cassette 4 transport path
		(e-STUDIO200/250 series)
	E36	Paper jam in LCF transport path
		(e-STUDIO200/250 series)
	E37 to E40	Reserved

December 2002 TOSHIBA TEC 1 - 1 e-STUDIO160/200/250 ADJUSTMENT ITEMS