Toshiba e-Studio160, e-Studio250 December 2002 Toshiba TEC STUDIO160/200/250 Adjustment Items

Classification	Error code	Machine status
Other operator calls	-	Internal tray full (when finisher bridge installed)
		(e-STUDIO200/250 series)
	-	No paper in the cassette 1
	-	No paper in the cassette 2
	-	No paper in the cassette 3
	-	No paper in the cassette 4 (e-STUDIO200/250 series)
	-	No paper in the LCF (e-STUDIO200/250 series)
	-	Cassette 1 is not ready
	-	Cassette 2 is not ready
	-	Cassette 3 is not ready
	-	Cassette 4 is not ready (e-STUDIO200/250 series)
	-	LCF is not installed (e-STUDIO200/250 series)
		Front cover or side cover of the copier is open
		Cover of the job separator is open
		Cover of the off set catch tray is open
		Cover of the bridge cover is open
		(e-STUDIO200/250 series)
		Cover of the ADU is open
		Side cover of the cassette 2 is open
		Side cover of the cassette 3 is open
		Side cover of the LCF is open
		(e-STUDIO200/250 series)
		Finisher joint is open (e-STUDIO200/250 series)
CALL SERVICE from drive		No staples (displayed only when stapling is designated)
system		(e-STUDIO200/250 series)
	C01	Main motor drive error
	C02 to C03	Reserved
	C04	PFP main motor drive error
	C05	Reserved
Temporary paper supply	C06	LCF feed motor error (e-STUDIO200/250 series)
mechanism error	C07 to C10	Reserved
	C11 to C12	Reserved
	C13	Cassette 1 error
	C14	Cassette 2 error
	C15	Cassette 3 error
	C16	Cassette 4 error (e-STUDIO200/250 series)
	C17	Reserved
	C18	LCF tray error (e-STUDIO200/250 series)
	C19	LCF feed motor abnormal (e-STUDIO200/250 series)
	C20	Reserved

December 2002 TOSHIBA TEC 1 - 3 e-STUDIO160/200/250 ADJUSTMENT ITEMS