Toshiba e-Studio250, e-Studio200, e-Studio160 manual Poor image transfer Feeding direction

(12) Poor image transfer

Feeding direction

Step	Cause/Defect area	Check items	Measures
1	Paper	Paper in cassette or LCF curled?	Reinsert paper with reverse side up or change
			paper.
2		Paper in cassette or LCF damp?	Change paper.
			Avoid storing paper in damp place.
3	Transfer charger	Transfer charger case dirty?	Clean transfer charger case.
4		Transfer charger wire dirty?	Clean transfer charger wire.
5	Registration roller	Registration roller malfunctioning?	Clean roller, or replace defective clutch-related
			parts.
6	Pinch roller	Pinch roller spring out of place?	Re-mount or replace spring.
7	HVPS (transfer/separation	High-voltage output defective?	Adjust output from HVPS, or replace defec-
	charger/guide bias)		tive HVPS.
8		If problem persists after measures	Replace process unit, laser scanner unit, or
		are applied, or there is no prob-	the transfer unit.
		lem found in above check, follow
		procedure described in right col-
		umn.

e-STUDIO160/200/250 TROUBLESHOOTING 4 - 70 December 2002 TOSHIBA TEC