Toshiba e-Studio160, e-Studio250 manual Relationship between wound turns and wire holder jigs

Notes:

1.When winding the wire on the pulley, keep the following points in mind.

•Do not wind the wire while twisting.

•Tensely wind the wire so that it will be placed in contact with the pulley.

•Wind the wire without leaving gaps.

•Be careful not to allow the wound wire to be shifted or come loose.

2.When fitting wire holder jigs, take care so that the turns wound on the pulleys do not move or unwind.

No gap should exist No gap should exist

065-12

Fig. 1-8-22

<Relationship between wound turns and wire holder jigs>

Clip jig

Pulley

065-13

Ball terminal

Wire

Clip jig

065-14

Clip jig

Fig. 1-8-23

December 2002 TOSHIBA TEC 1 - 81 e-STUDIO160/200/250 ADJUSTMENT ITEMS