Toshiba e-Studio250, e-Studio200, e-Studio160 manual Individual Test, Program, Set Cis

(2)INDIVIDUAL TEST

The user can perform a test in interactive mode and locate the faulty point from the test result. The test result is printed in the form of a report.

<Key used in operation>

	PROGRAM	Press the PROGRAM key
Select TEST MODE		Use or keys

<Display messages>

PROGRAM

01.DEFAURT SETTINGS 02.LISTS 03.INITIAL SETUP

SET

Select INDIVIDUAL TEST

Use or keys

TEST MODE 01.AUTO TEST 02.INDIVIDUAL TEST 03.TEST RESULT LIST

SET

Select item to be tested

SET

CIS

Test Items

Use or keys

Selected test is performed

INDIVIDUAL TEST 01.ADF TEST 02.KEY TEST 03.LED LIST

04.LCD TEST 05.SPEAKER TEST 06.SWITCH TEST

07.TEST PRINT

a)ADF test

b)Key test

c)LED test

d)LCD test

e)Speaker test

f)Sensor test

g)Printer test

Transports and ejects originals to check the transport system. Transports and ejects a certain number of originals and displays the number of the originals. The tester checks that this value matches the number of the origi- nals. A transport speed can be selected with the resolution key.

Press all the keys on the operation panel to check if they are detected nor- mally. The key test ends when the STOP key is pressed in the end. If there is any key which is not detected when pressed before the STOP key is pressed, it will be judged to be an error.

When the test is performed, all the LEDs will come on. If there is any LED which is not lit when visually checked, it will be judged to be an error.

All the dots on the display go off (turn black). When the Start key is then pressed, all the dots light (turn white). If there is any dot which does not light or go off when visually checked, it will be judged to be an error.

Check that the volume level from the speaker changes.

Sensor test.

Open and close the covers by following the guidance appearing on the dis- play.

Checks the printer function by printing two test patterns.

December 2002 TOSHIBA TEC 1 - 19 e-STUDIO160/200/250 ADJUSTMENT ITEMS