Toshiba e-Studio250, e-Studio200, e-Studio160 manual RAM clear table, Func

RAM clear table

					Service parameter setting
RAM data Country/
			FUNC/	Service	Service		Journal	Error data	Protocol	Counter	Drum
		Region		adjustment				on FAX			related
RAM clear mode		setting	SYSFUNC/	data ([0][5])	setting data		report	communi-	trace	data	data
			UAD etc.	area	([0][8]) area		data	cation	data	*a)	*b)
			Set default		Set default
[1] [3] [*] and turn ON	*2) *3)		value		value	*e)	Clear	Clear	Clear
[1] [3] [#] and turn ON	*2)								Clear	Clear
[*] [#] and turn ON	*2)						Clear	Clear	Clear
[START] [STOP] and			Set default		Set default
turn ON	*2)		value		value	*e)			Clear
[0] [8] and turn ON, then				Set default	Set default
[6] [6] [5]	*1)			value	value				Clear
			Set default		Set default
[0] [2] and turn ON		Changeable	value		value	*e)	Clear	Clear	Clear
1. PIX MEMORY
			Set default
2. EXCEPT USER MEMORY			value				Clear	Clear
3. ALL	*3)		Set default		Set default
(Same as “[1] [3] [*] and turn ON”)			value		value	*e)	Clear	Clear	Clear
4. USER AREA	*3)								Clear

*1) In case of replacing the main board in the field, you can initializes the parameters related to copy function stored on the board using this function.

Therefore when this function is performed, it is necessary to readjust the follow- ing items.

1)Adjustment of paper aligning value

2)Printer unit adjustment

3)Scanner unit adjustment

4)ADF/RADF installation setting

*2) When RAM clear is performed, no message is indicated on the LCD. Once RAM clear has been completed, “Please wait” appears on the LCD.

*3) RAM clear may take more than 10 seconds. Note that the error (Broken Regis- tration) results if the power is turned off during RAM clear.

e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 40 December 2002 TOSHIBA TEC