Near the PFP upper transport roller

Is the PFP clutch working? (using the test mode 10, Output Test, CODE 225)

NO

YES

1. Check if each connector between the PFP clutch and the PFP PWA (CN244) is disconnected.

2.Check if each connector between the PFP PWA (CN241) and the PFC PWA (CN206) is disconnected.

3.Check if each connector between the PFC PWA (CN201) and the relay PWA (CN36) is disconnected.

4.Check if each connector pin is removed or the harness is broken.

5.Check if any conductor pattern on the PFP, PFC, relay and main PWA is open- or short-circuited.

6.Replace the PFP clutch.

7.Replace the PFP PWA.

8.Replace the PFC PWA.

9.Replace the relay PWA.

10.Replace the main PWA.

Check to see if there are any foreign obstacles on the recording paper path.

December 2002 TOSHIBA TEC

4 - 15

e-STUDIO160/200/250 TROUBLESHOOTING

Page 137
Image 137
Toshiba e-Studio160, e-Studio250, e-Studio200 manual Yes