Toshiba e-Studio200, e-Studio250 manual Appendix C. Options, Appendix D. Replacement Units/Supplies

Appendix C. Options

Original cover	KA-1600PC, KA-1600PC-N
Paper feed pedestal-1 (PFP)	KD-1009, KD-1009-N
Automatic duplexing unit-1(ADU)	MD-0101, MD-0101-N
Automatic document feeder (ADF)	MR-2012, MR-2012-N
Reverse automatic document feeder-1 (RADF)	MR-3011
Paper feed unit (PFU)	MY-1015, MY-1015-N
Cassette module (CM)	MY-1017, MY-1017-N
	(for e-STUDIO200/250 series)
Large capacity feeder (LCF)	KD-1010, KD-1010-N
	(for e-STUDIO200/250 series)
Paper feed controller (PFC)	GH-1030, GH-1030-N
Job separator (JSP)	MJ-5001, MJ-5001-N
Offset tray	MJ-5002, MJ-5002-N
Stack feed bypass (SFB)	MY-1016, MY-1016-N
Printer kit (Printer control)	GA-1031
Memory kit	GC-1050, GC-1050-N
Fax board kit	GD-1061-EU, GD-1061-NA, GD-1061-AU,
	GD-1060-SA, GD-1061C
Internet fax kit	GD-1070
NIC kit (Network interface card)	GF-1110
Staple with surface	KK-1600
Finisher	MJ-1011 (for e-STUDIO200/250 series)

Appendix D. Replacement Units/Supplies

(1)	Replacement units
		Fuser unit	FUSER-1600-120, FUSER-1600-240 (for e-STUDIO160 series)
			FUSER-2500-120, FUSER-2500-240 (for e-STUDIO200/250 series)
		Transfer charger unit	MAIN-CH-1600
(2)	Process unit
		Process unit	PU-1610S, PU-1610ES, PU-1610DS, PU-1610DSN, PU-1610CS
(3)	Supplies
		Toner cartridge	T-1600, T-1600E, T-1600D, T-1600C (for e-STUDIO160 series)
			T-2500, T-2500E, T-2500D, T-2500C (for e-STUDIO200/250 series)

e-STUDIO160/200/250 APPENDIX A - 6 December 2002 TOSHIBA TEC