Toshiba e-Studio160, e-Studio250 manual Following tests can be conducted in the Function test mode

1.2.4 Function test

The function test checks each function of the copier. To enter the function test mode, follow the procedure below, or enter the Service mode (*,#,*,*) and select the menu for the function test

<Key used in operation>

1 3 Power ON

or Select test menu

SET

<Display messages>

FUNCTION TEST 01.OPE.PANEL TEST 02.PRINT TEST 03.MODEM TEST

The following tests can be conducted in the Function test mode.

01.OPE. PANEL TEST

02.PRINT TEST

03.MODEM TEST *1 (Factory test)

04.SENSOR TEST

05.SRAM TEST

06.DRAM TEST

07.CLOCK IC TEST

08.SCANNER TEST

09.CODEC TEST

10.OUTPUT TEST

11.PRINTER BOARD TEST *2

*1:	When the FAX kit (GD-1061) is not installed, the test is not present.
*2:	When the PCL kit (GA-1031) is not installed, the test is not present.

December 2002 TOSHIBA TEC 1 - 21 e-STUDIO160/200/250 ADJUSTMENT ITEMS