Toshiba e-Studio160, e-Studio250, e-Studio200 manual From preceding, CLEAR/STOP Cancel

From preceding page

START

: Turn the transfer guide bias ON.

Measure the transfer guide bias at the following two points:

Important:

The settings and conditions of the digital tester to be used for measurement are as

follows:
Function switch:	DC
Full scale:	1000V
Remark:	The digital tester to be used should have an input resistance
	value of 10MΩ or more.

Measurement value: +375±20V

To measure on the pinch roller:

Frame grounding

Pinch roller

terminal

terminal 01-11-02

CLEAR/STOP

CANCEL

CANCEL

Power OFF

To measure on the paper guide plate:

Frame grounding

Paper guide plate

terminal

01-11-03

terminal

:Turn the transfer guide bias OFF.

:End the output test.

December 2002 TOSHIBA TEC 1 - 93 e-STUDIO160/200/250 ADJUSTMENT