Blotched image Feeding direction | Toshiba e-Studio160, e-Studio250

(11) Blotched image

Step	Cause/Defect area	Check items	Measures

1	Paper	Paper too thin?	Change paper.

2		Paper too dry?	Change paper.

3	Transfer charger unit	Transfer charger case dirty?	Clean case.

4		Transfer charger wire dirty?	Clean wire.

5	HVPS (transfer/separation	High-voltage output defective?	Adjust output from HVPS, or replace defec-
	charger)		tive HVPS.

6		If problem persists after measures	Replace process unit.
		are applied, or there is no prob-
		lem found in above check, follow
		procedure described in right col-
		umn.

4 - 69

e-STUDIO160/200/250 TROUBLESHOOTING