Poor fusing Feeding direction | Toshiba e-Studio160, e-Studio250

(17) Poor fusing

Step	Cause/Defect area	Check items	Measures

1	Paper	Paper dump?	Change paper.

2	Fuser unit	Pressure springs working nor-	Check mechanism.
		mally?

3		Heat roller temperature too low?	Check heater control circuit.

4		If problem persists after measures	Replace process unit or fuser unit.
		are applied, or there is no prob-
		lem fund in the above check, fol-
		low procedure described in right
		column.

4 - 75

e-STUDIO160/200/250 TROUBLESHOOTING