1.4.3 Scanner unit adjustment
a) CCD primary scanning deviation
(1)Place the scale (its end to the rear side original scale and its side to the left side original scale) on the original glass and make an A4/LT 100% copy.
Copy movement direction
100
E
(2)In order to correct the distance "E", which should be 100 mm from the position copied to the bottom of the paper, adjust as follows.
0 | 5 |
|
|
|
|
|
|
|
|
|
|
Power ON | 3 | 0 | 6 | SET | Digital Keys | SET | INT | START | INT | Power OFF | |
|
|
| or |
| or |
|
|
|
| ||
|
| (Code) | (Set the value) |
| (Test copy) |
|
| ||||
|
|
|
|
| START |
| START |
|
|
|
|
Notes: 1. An increase in the value makes the image shift to the paper edge (0.04233 mm/step).
2.Adjustment value is able to be input within the range of 5 - 251. The default adjustment value is 128.
December 2002 TOSHIBA TEC | 1 - 61 |
