4.1.6 Paper transporting jam at the RADF

E71 Original feeding jam at the feeding area of RADF

When original is left inside the RADF, remove it. If this error occurs frequently, the following items should be checked.

[Two or more originals are fed simultaneously.] Have too many originals been placed?

YES

NO

Reset the originals, following the specification.

Are the original sheets curled or folded too much?

YES

NO

Flatten and reset the originals.

Are different-size originals placed together?

YES

NO

Set only one-size originals.

Is the separation roller stained?

YES Clean the separation roller.

[The original does not reach the feed roller.]

Does the paper thickness satisfy the specifications?

NO

YES

Reset the originals, following the specification.

Is the pickup roller, feed roller or separation roller stained?

YES

NO

Clean the roller.

Is the transporting force of the pickup roller, feed roller or separation roller insufficient?

YES Replace the rollers.

e-STUDIO160/200/250 TROUBLESHOOTING

4 - 24

December 2002 TOSHIBA TEC

Page 146
Image 146
Toshiba e-Studio160, e-Studio250, e-Studio200 manual Yes