Toshiba e-Studio160, e-Studio250, e-Studio200 manual Blurred image Feeding direction

(2) Blurred image

Feeding direction

Step	Cause/Defect area	Check items	Measures
1	Paper	Paper in cassette or LCF damp?	Change paper. Avoid storing paper in damp
			place.
2	Machine installation place	Is machine installed on a slant	Place machine on flat surface.
		surface?
3	Process unit (developer)	Is toner running short?	Replace toner cartridge.
			Check to see that toner empty sensor and
			empty detection circuit operate properly.
4	Transfer charger unit	Transfer charger wire dirty?	Clean transfer charger wire.
5		Transfer charger wire slacked?	Replace transfer charger unit.
6		Foreign matter such as dust stick-	Clean transfer guide roller.
		ing to transfer guide roller?
7	Process unit (drum)	Drum bedewed or dirty?	If problem persists, replace process unit or
			drum.
			Note: Never touch drum surface.
8	Laser scanner unit	Foreign matter or dust on lens?	Remove foreign matter or dust with blower.
			(Do not use a cloth.)
9		If problem persists after measures	Replace the process unit, transfer unit, or la-
		are applied, or there is no prob-	ser scanner unit.
		lem found the above check, fol-
		low procedure described in right
		column.

e-STUDIO160/200/250 TROUBLESHOOTING 4 - 60 December 2002 TOSHIBA TEC