Toshiba e-Studio200, e-Studio250, e-Studio160 manual Rear Side Front Side

7.Apply the screw lock paint to all the screws se- cured.

(b) Installing the wire to the pulleys Winding the wire on pulley.

1. Fit the φ3.2 spherical terminal at the center of

the wire into the hole in the wire winding pulley.	Pulley
Wind up the wires on the front and rear sides,
respectively, as shown below and secure the
wire with the clip jig to prevent it from getting
loose.	Ball terminal
	065-10
	Fig. 1-8-19
[Rear Side]	[Front Side]

Hook

Scanner drive shaft

5½ turns

Hook

Wire

4½	turns		4½	turns
		Wire

Hook

5½	turns		Scanner drive shaft
Spherical		Spherical	065-01
terminal		terminal

Fig. 1-8-20

Clip jig

Ball terminal

Ball terminal

Clip jig 065-11

Fig. 1-8-21

e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 80 December 2002 TOSHIBA TEC