Toshiba e-Studio250, e-Studio200, e-Studio160 manual Print

							Image		Acceptable	Refer to
Code	Factor		Setting item			Mode	quality	Default
									value *1	page
							mode
410	Process	Fixing temperature when printing				ALL		8	4-13
		4: 170°C 5: 175°C 6: 180°C 7: 185°C						(10)
		8: 190°C	9: 195°C	10: 200°C
		11: 205°C	12: 210°C		13: 215°C			*1
411	Process	Fixing temperature when ready				ALL		7	0-7
		0: 170°C 1: 175°C 2: 180°C 3: 185°C
		4: 190°C	5: 195°C	6: 200°C
		7: Drop control ON
412	Process	Fixing temperature in low power state				ALL		NAD: 5	0-5
		0: OFF 1: 120°C 2: 130°C 3: 140°C						Other: 4
		4: 150°C 5: 160°C						(NAD: 3)
								(Other: 2) *1
413	Process	Fixing temperature for thick paper				ALL		0	0-4
		0: Invalid 1: 195°C 2: 200°C 3: 205°C						(2)
		4: 210°C						*1
446	Process	Correction for transfer output ON timing.				ALL		11	0-18	1-91
*2		(0: -110 ms -----18: +70 ms)							10 ms/step
447	Process	Correction for transfer output OFF timing.				ALL		1	0-18	1-91
*2		(0: +110 ms -----18: -70 ms)						(11) *1	10 ms/step
462		Setting for switchback operation to copy						0	0-1
		mixed-size originals form RADF
		0: Invalid 1: Valid
480	PRINT	Cassette priority selection				ALL		0	0-5
		0: A4/LT 1: LCF 2: Cassette 1
		3: Cassette 2 4: Cassette 3
		5: Cassette 4
481	PRINT	Auto cassette change				ALL		1	0-1
		0: None 1: Normal
483	PRINT	Polygon motor preceding start-up setting				ALL		0	0-2
		0: Valid (DF, platen)		1: Invalid
		2: DF only
486	PRINT	Time for suspension of the Polygonal mo-				ALL		0	0-2
		tor pre-running
		(0: 15 sec, 1: 30 sec, 2: 45 sec)
503	Image	Density default in image quality mode				PPC	ALL	0	0-8
	processing	0: AUTO 1: Light 3 2: Light 2
		3: Light 1	4: Center	5: Dark 1
		6: Dark 2 7: Dark 3
		Also reflected on panel.
504	F/W	Special paper selection				PPC		0	0-2
		0: FOLIO/B size
		1: 13" LEGAL (South America only)
		2: K size (China only)
550	Image	Image mode default				PPC	ALL	0	0-2
	processing	0: Standard 1: Photo			2: Text
603	F/W	Auto duplex mode (when document is				PPC		0	0-2
		loaded into DF)
		0: Invalid	1: Simplex/Duplex
		2: Duplex/Duplex
604	F/W	APS priority selection				PPC		0	0-3
		0: APS 1: AMS 2: None (100%)
		3: Reserved
611	F/W	Book duplex document selection				PPC		0	0-1
		0: Left-hand open 1: Right-hand open
614	F/W	The function clear LED blinks. Blinks when				PPC		1	0-1
		the value is different from the present de-
		fault value after copying (until auto clear
		or all clear.)
		0: Invalid (Always off)			1: Valid

*1 : The value in parentheses is for the model e-STUDIO200/250 series.

*2 : This value should be adjusted at the factory. Do not change the value in the field. When the main PWA is replaced, it should be entered again.

e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 16 December 2002 TOSHIBA TEC