Toshiba e-Studio250, e-Studio200, e-Studio160 manual Sizpfu

Data	Bit		Input info.		Function			Value
15 (S4)	7			Reserved
	6			SIZE-SNS 3 (Original width sensor 3)		0: No paper 1: Paper present
Scanner sensor	5			SIZE-SNS 2 (Original width sensor 2)		0: No paper 1: Paper present
status 2	4			SIZE-SNS 1 (Original width sensor 1)		0: No paper 1: Paper present
Low order	3			Reserved			-
8 bits	2			Reserved			-
	1			Reserved			-
	0			Reserved			-
16 (P1)	7	SIZPFU		2CST-SW (PFU Cassette switch)		0: Installed 1: Not installed
	6	-		Reserved			-
PFC	5	-		Reserved			-
Input check 1	4	-		Reserved			-
	3	PFUFD-SW		OCF-SEN (2nd feed sensor)		0: No paper 1: Paper present
	2	PFUCOV		2COV-SW (PFU cover open switch)		0: Closed 1: Open
	1	PFUEMP		2PE-SEN (PFU paper empty sensor)		0: Paper loaded
						1: Paper empty
	0	PFUUP		2T-UP-SEN (PFU tray-up sensor)		0: Not lifted up 1: Lifted up
17 (P2)	7	SIZCU		CST-U-SW (Upper cassette detection switch)		0: Installed 1: Not installed
		LCTRBTM		TRY-BTH-SNR (Tray bottom sensor)		0: Other	1: Lower limit
PFC	6	-		Reserved			-
Input check 2		CFENCL0		PR-MST-SS (Standby side paper mis-staking sensor)		0: OFF 1: Closed
*1	5	-		Reserved			-
		SIZLC		Cassette detection switch (LCF)		0: Installed 1: Not installed
	4	FEDU		FED-U-SNR (Upper feed sensor)		0: No paper 1: Paper loaded
		-		Reserved			-
	3	-		Reserved			-
		-		Reserved			-
	2	COV-SW		SIDE-COV-SW (Side cover open/close switch)		0: Closed 1: Open
		-		Reserved			-
	1	PEMPU		EMP-U-SNR (Upper cassette paper empty sensor)		0: Paper loaded 1: No paper
		-		Reserved			-
	0	TUPU		TOP-U-SNR (Upper cassette tray-up sensor)		0: Not lifted up 1: Lifted up
		-		PST-SNR-FS (Feeding side paper stock sensor)			-
18 (P3)	7	SIZCL		LST-L-SW (Lower cassette detection switch)		0: Installed 1: Not installed
		LMTBCKF		EMD-F-HP-SNR (End fence home position sensor)		0: Other	1: Fence back limit
PFC	6	-		Reserved			-
Input check 3		LMTFWDK		END-F-STP-SNR (End fence stop position sensor)		0: OFF 1: Fence forward limit
*1	5	-		Reserved			-
		LCEMPFD		EMP-SNR-SS (Standby side empty sensor)		0: OFF 1: Open
	4	FEDL		FED-L-SNR (Lower feed sensor)		0: No paper 1: Paper loaded
		LCSIDCOV		Side cover open/close switch (LCF)		0: Open	1: Closed
	3	PLL-OK		PLL lock signal		0: Stable	1: Other
		LCMOTLD		LCF transport motor		0: Operating 1: Motor stopped
	2	-		Reserved			-
		LCTRTOP		TOP-SNR (Tray-up sensor)		0: Other	1: Upper limit
	1	PEMPL		EMP-L-SNR (Lower cassette paper empty sensor)		0: Paper loaded 1: No paper
		LCRLYSW		FED-SNR (Feed sensor)		0: Paper detected 1: No paper
	0	TUPL		TOP-L-SNR (Lower cassette tray-up sensor)		0: Not lifted up 1: Lifted up
		LCEMP		EMP-SNR-FS (Feeding side empty sensor)		0: No paper 1: Paper present

*1: The upper value for each bit indicates the function assumed when the PFP is installed, and the lower value the function assumed when the LCF is installed.

December 2002 TOSHIBA TEC 1 - 31 e-STUDIO160/200/250 ADJUSTMENT ITEMS