Toshiba e-Studio250, e-Studio200, e-Studio160 manual 05-03-016

5.3.2 Downloading

Download the firmware by using the download disks (Disks 1 and 2) created in the procedure of “5.3.1 Creating Download Disks”

Important: • The download program cannot be run normally at the MS-DOS prompt after Windows 95/98 is started. Once end Windows, insert the download disk (Disk 1) in the drive, and turn the power ON to directly start the program from the floppy disk.

•While the data is being updated, do not turn the copier or PC power OFF, or the data may be destroyed and the copier may fail to operate normally.

•Do not remove the floppy disk from the drive until you are instructed to do so. The disk or drive may be damaged.

(1)Insert the download disk (Disk 1) in the floppy disk drive and turn the PC power ON.

The download menu screen appears.

05-03-016

December 2002 TOSHIBA TEC 5 - 13 e-STUDIO160/200/250 UPDATING THE FIRMWARE