Pioneer DVR-650H-K Parental Lock Set Password, Change Level, Country/Area, Code, Angle Indicator

14The Initial Setup menu

Setting	Options	Explanation
Seamless Playback	On	Playback is smooth, but with a trade-off against the
		accuracy of the edit points.
	Off •	You may notice momentary interruption at edited
		points during playback of a VR mode Play List.

This setting applies to HDD, DVD-R/-RW (VR) and DVD-RAM playback.

Parental Lock	Set Password	In order to change the parental lock level or change
		the country/area code, set the password using this
		option. From the following screen, enter a four-digit
		number that will be your password.
	Change Password	In order to change the password, first enter your
		existing password and then a new one from the
		following screen.
	Change Level	From the following screen, first enter your password
		and then set a parental lock level.
	Country/Area	From the following screen, first enter your password
	Code	and then set a country/area code. See Country/Area
		code list on page 124.

Only certain discs have parental lock and country/area code features. Check the disc packaging to see what features the disc has. If you forget your password you can reset it by resetting the recorder to its factory settings. See Resetting the recorder on page 127.

Angle Indicator	On •	A camera icon appears on-screen during multi-angle
		scenes on a DVD-Video disc.
	Off	Nothing is indicated on-screen when a multi-angle
		scene is showing.
HDMI Output (only available when an HDMI device is connected)
Screen Resolution	1920 x 1080p	Constant 1920 x 1080p output.
	1920 x 1080i	Constant 1920 x 1080i output.
	1280 x 720p	Constant 1280 x 720p output.
	720 x 480p	Constant 720 x 480p output.
	720 x 480i	Constant 720 x 480i output.

• If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case, press OPEN/CLOSE while holding down the (Stop) button on the front panel to switch the setting (this also switches Component Video Out on page 105 to the default setting).

• If you have the Colour set to YCbCr 4:2:2, you cannot select 720 x 480i.

4:3 Video Output	Full	Select if your HDMI TV allows you to change the
		aspect ratio.
	Normal	Select if your HDMI TV does not allow you to change
		the aspect ratio. 4:3 video will be shown with bars on
		each side.

110

En