Recording
49
En
05
•A VR mode DVD-R/-RW (excluding DVD-
R DL) disc can still be recorded and
edited on this recorder even after
finalizing.
• DVD-R DL (Video mode) discs and
DVD+R DL discs must be finalized in
order to play in other recorders/players.
Note however that some recorders/
players will not play even finalized dual-
layer discs.
1 Load the disc you want to finalize.
Make sure that the recorder is stopped
before proceeding.
2 Select ‘Disc Setup’ from the
Home Menu.
3 Select ‘Finalize’ > ‘Finalize’ >
‘Next Screen’.
4 For DVD-R/-RW (Video mode)
and DVD+R/+RW discs only, select a title
menu style, then select ‘Yes’ to start
finalization or ‘No’ to cancel.

The menu you select will be the one that

appears when the ‘top menu’ (or ‘menu’ for a

DVD+R/+RW) is selected on any DVD player.

• Discs recorded partially or fully on the
Pioneer DVR-7000 DVD recorder do not
support this feature. These discs will
have only a text title menu when finalized
on this recorder.
5The recorder will now start finalizing
the disc.
During finalization:
• If the finalization process of a DVD-RW
or DVD+R/+RW disc is going to take
more than around four minutes, you can
press
ENTER
to cancel. Around four
minutes before completion, the option to
cancel disappears.
• You can’t cancel the finalization of a VR
mode DVD-R disc.
• How long finalization takes depends on
the type of disc, how much is recorded
on the disc and the number of titles on
the disc. A disc recorded in VR mode can
take up to one hour to finalize. DVD-R/
-RW (Video mode) and DVD+R/+RW
discs can take up to 20 minutes.
Initializing recordable DVD
discs
DVD-R/-RW discs can be initialized for either
Video mode recording or VR mode
recording.
1
When you first load a blank DVD-RW or
DVD+RW disc, the recorder initializes it for
recording automatically. By default, blank
DVD-RW discs are initialized for VR mode
recording. See
DVD-RW Auto Initialize
on
page 50 if you want to change the default to
Video mode.
DVD-R discs are ready for Video mode
recordings out of the box; if you want to use
a DVD-R for VR mode recording, you must
initialize it before recording anything on the
disc.
HOME MENU
ENTER
Basic
Initialize
Finalize
Optimize HDD
Disc Setup
Finalize
Undo Finalize
Next Screen
Start
Finalize
ENTER
Finalize
Note
1 If a disc was previously finalized on an older DVD recorder, you may not be able to re-initialize and/or initialize
it for Video mode recording.
DVD-R DVD-RW DVD+RW DVD-RAM
DVR650HK_KC_EN.book 49 ページ 2007年2月21日 水曜日 午後4時31分