Pioneer DVR-650H-K Connections Connecting to a cable box or satellite receiver

02Connections

Connecting to a cable box or satellite receiver (2)

If many or all the channels you receive by cable or satellite are scrambled, we

recommend using this setup.1

Using the setup on this page you can:

•Record any channel by selecting it on the cable box/satellite receiver.

•Record using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 46).

1

Antenna/cable TV wall outlet

									From audio/
To antenna input									video output
From antenna output
					Cable box/
					Satellite receiver
								3
			INPUT 1/AUTO
ANTENNA				START REC
IN (RF IN)
ANTENNA					R	AUDIO	L	VIDEO
IN								OUTPUT 2	DIGITAL
		INPUT 3							AUDIO OUT
R	AUDIO	L	VIDEO		S-VIDEO			S-VIDEO	AC IN
								CONTROL	HDMI OUT COAXIAL
								IN
OUT
	INPUT 1/AUTO START REC				Y	PB		PR
						COMPONENT VIDEO OUT OUTPUT 1
ANTENNA								OUTPUT 1
OUT

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amp/receiver.

1

To antenna input

2

To audio/video input

TV

1Connect RF antenna cables as shown. This enables you to watch and record TV channels.

2Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your TV using a set of A/V cables (as supplied). This enables you to watch discs.

3Connect the audio/video output of your cable box/satellite receiver to the INPUT 1 jacks on this recorder using a set of A/V cables.

This enables you to record scrambled TV channels.

20

En

Note

1• The setup on this page does not allow you to watch one channel and record another.

•The diagram shows standard video connections, but you can alternatively use the S-video or component video connections if they’re available.