Pioneer DVR-650H-K Playing your recordings on other DVD players, Finalizing a disc

05Recording

3Program the IR controller supplied with your STB to send start/stop recording codes for a Pioneer VCR.

See the manual that came with the STB for how to do this.

Only the REC and STOP codes have any effect when used with this recorder:

•REC – Start recording

•STOP – Stop recording

4Position the IR controller so that it will control this recorder.

When you finalize a DVD-R/-RW (Video mode) or DVD+R disc, a title menu is created from which you can select titles when you play the disc. There are a number of different styles of title menu to choose from to suit the content of the disc.

All the title menus are navigated in the usual way, pressing MENU or TOP MENU to display the menu, then using the

followed by ENTER to select titles and start playback.

The IR sensor on the recorder is located just above the mark on the front panel.

Making a timer recording

1 Set the timer on the STB.

See the manual that came with your STB for how to do this.

2 Switch on this recorder.

You must leave the recorder on until the recording finishes.

•At the programmed times, the STB will start and stop recording on this recorder.

Playing your recordings on other DVD players

DVD (VR) DVD (Video) DVD+R DVD+RW

Most regular DVD players can play finalized discs recorded in DVD-R/-RW (Video mode) and DVD+R discs. A number of players (including many Pioneer models) can also play DVD-RW discs recorded in VR mode, finalized or not. Most players will not play VR mode DVD-R discs, although some DVD- ROM drives and DVD recorders may be able to (finalization might be necessary). Check the manual that came with the player to check what kinds of discs it will play.

Finalizing a disc

DVD (VR) DVD (Video) DVD+R DVD+RW

Finalizing ‘fixes’ the recordings on the disc so that it can be played on a regular DVD player or computer equipped with a suitable

DVD-ROM drive.1

Note that the disc name will appear in the title menu after you finalize a disc. Make sure the disc name is as you want it before you finalize the disc as it can’t be changed afterwards. If you want to rename the disc, see Input Disc Name on page 98 before starting the steps below.

DVD+RW discs don’t generally need finalizing. However, if you want a title menu to appear when you play the disc, then you will need to finalize. When using a DVD+RW, you can still record and edit even after finalizing. although the title menu will disappear if you do so. Finalize the disc again to generate a new title menu.

Important

•Once you’ve finalized a DVD-R/-RW (Video mode) or DVD+R disc, you can’t edit or record anything else on that disc. However, the finalization on a DVD-RW disc maybe ‘undone’; see Undo Finalize on page 99 for how to do this.

48

En

Note

1 If the TV line system of the disc is different to the current setting of the recorder, you will not be able to finalize the disc.