Pioneer DVR-650H-K Connections Using other types of video output, Output, Brightness signal

02Connections

Using other types of video output

This recorder has standard (composite), S- video and component video outputs. The main difference between them is the quality of the picture. S-video delivers a better picture than composite video, while component video gives better picture quality still. The variety of outputs also gives you the flexibility of connecting your particular equipment using the best connection type available.

1Connecting using an S-video output S-video carries the picture as separate colour and luminance (brightness) signals.

There are two S-video outputs for connection to TVs, monitors, VCRs or other equipment.

•Use an S-video cable (not supplied) to connect an S-VIDEO OUTPUT (1 or 2) to an S-video input on your TV, monitor (or other equipment).

2 Connecting using the component video

output

Component video carries the picture as two

	To component video input
2	TV

To S-video input

1

separate colour signals, plus a luminance

(brightness) signal.

See also Component Video Out on page 105 for how to set up the component video output for use with a progressive scan- compatible TV.

							S-VIDEO
							OUTPUT
ANTENNA				R	AUDIO	L	VIDEO
IN									DIGITAL
		INPUT 3		S-VIDEO					AUDIO OUT
R	AUDIO	L	VIDEO						AC IN
							CONTROL	HDMI OUT	COAXIAL
							IN
OUT
	INPUT 1/AUTO START REC			Y		PB	PR
					COMPONENT VIDEO OUT OUTPUT 1

COMPONENT

VIDEO OUT

•Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV, monitor (or other equipment).

18

En