Pioneer DVR-650H-K operating instructions Initial Setup menu

The Initial Setup menu				14
Setting	Options	Explanation
VCR Plus+ CH	Next Screen	Guide channels are used by the VCR Plus+ system
Setting		so that the channel number specified in the VCR
		Plus+ programming numbers can be guaranteed to
		correspond to the correct station. Look in your TV
		guide to see which channel numbers should be
		assigned to which guide channels.
		• Use the	buttons to change the guide channel
		for setting.
		• Use the	buttons to change the channel
		number.
		• Use the PREV	/ NEXT	button to display
		the previous/next 10 guide channels.
		• To return to the Initial Setup menu, press ENTER.
Video Out
Component Video	Interlace •	Select if your monitor/TV is not compatible with
Out		progressive-scan video.
	Progressive	Select if your monitor/TV is progressive-scan
		compatible. Check the operating instructions that
		came with your monitor/TV if you’re not sure.

•If your TV is incompatible with progressive scan video and you select Progressive, you will not be able to see any

picture at all. In this case, press OPEN/CLOSE while holding down the (Stop) button on the front panel to switch to Interlace (this also switches Screen Resolution on page 110 to the default setting).

•When the HDMI signal is output, no video is output from the COMPONENT VIDEO OUT.

Audio In

External Audio	Stereo •	Select if the audio from the currently selected
		external input is standard stereo.
	Dual Mono	Select if each channel carries a separate soundtrack.

When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder whether the audio is stereo or dual mono. This has priority over the setting you make here.

Dual Mono	L •	Select to record the left channel of an external dual
Recording		mono source when recording to DVD in Video mode,
		to HDD with HDD Recording Format set to Video
		Mode On, or in LPCM mode.
	R	As above, but for right channel recording.

When recording dual mono audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.

105

En