LION SENSOR (OPTIONAL)
Fig 20
Setup Procedure:
1.Remove labels and web from inside the sensor.
2.Center the “Gain Adjust” by turning it four turns
3.Then, turn the “Gain Adjust” back 2 turns clockwise.
4.Set the “Zero Adjust” to a point where the ZERO light starts to come on.
5.While moving labels on the web through the sensor.
Set the “Gain Adjust” to a point where the “Edge” light starts to flash.
6.Keep Turing the “Gain Adjust” ½ turn clockwise.
7.The sensor is now ready to use.
Fig 20A | Gain Adjust | Zero Adjust |
Page 22
